仓储分拣效率翻倍！这些CAN设备才是隐形“分拣

仓储分拣的核心诉求是“快、准、稳”，但分拣点位分散、布线杂乱、设备联动不畅等问题，常导致效率偏低。其实选对CAN设备，就能轻松破解痛点，实现降本增效。
The core demands of warehouse sorting are "fast, accurate, and stable", but problems such as scattered sorting points, disorderly wiring, and poor equipment linkage often lead to low efficiency. In fact, choosing the right CAN device can easily solve pain points and achieve cost reduction and efficiency improvement.

一、仓储分拣核心CAN设备
1、 Core CAN equipment for warehouse sorting

无需繁杂设备，这4类可覆盖分拣全流程，适配多种分拣模式。
No need for complicated equipment, these 4 types can cover the entire sorting process and adapt to multiple sorting modes.

1.CANopen I/O模块：就近接入传感器、电磁阀等，布线简洁，稳定采集信号、控制执行动作，适配不同规模仓储。
1. CANopen I/O module: Connected to sensors, solenoid valves, etc. nearby, with simple wiring, stable signal acquisition, control execution actions, and adaptability to different scales of storage.

2.CANopen伺服：精准控制分拣小车启停、调速，实现多轴同步，减少错分、偏移，提升分拣合格率。
2. CANopen servo: Accurately control the start stop and speed regulation of the sorting cart, achieve multi axis synchronization, reduce misclassification and offset, and improve the sorting pass rate.

3.CAN中继/隔离器：延长通信距离、隔离现场干扰，避免分拣卡顿，保障设备连续运行。
3. CAN relay/isolator: Extend communication distance, isolate on-site interference, avoid sorting lag, and ensure continuous operation of equipment.

4.USBCAN分析仪：快速排查故障、监控总线数据，缩短检修时间，降低停机损耗。
4. USBCAN analyzer: Quickly troubleshoot, monitor bus data, shorten maintenance time, and reduce downtime losses.

二、应用核心好处
2、 Core benefits of application

1.效率提升50%+，破解分拣瓶颈；
1. Efficiency improved by over 50%, breaking through sorting bottlenecks;

2.误差清零，减少货物损耗；
2. Zero the error and reduce the loss of goods;

3.运维成本降低30%，布线、检修更省心。
3. Reduce operation and maintenance costs by 30%, and make wiring and maintenance more worry free.

如果您在从事仓储分拣项目，需要应用到以上类型的CAN设备，可以加微信13019325660或前往沈阳广成科技官网具体咨询。
If you are engaged in warehouse sorting projects and need to apply the above types of CAN devices, you can add WeChat 13019325660 or visit the official website of Shenyang Guangcheng Technology for specific consultation.